Versions

The Surprise series is available in 3 versions

For the moment, all our boats are keelboats. Depending on future demand, we may develop Surprises with lifting keels, ballasted dinghies, or even twin keels.

Confort Version

The ideal model for excursions and regattas with friends. Set sail, anchor near a beach and enjoy the sun !

Standard Version

The perfect model for achieving optimum performance from a boat which no longer needs to prove itself.

Club Version

A model with sleek fittings that fits the tightest budgets.

Below is an inventory of Surprise equipment by version.

Confort

Boat interior

White counter-molding

Off-white lining finish

Taupe-colored mattresses for forepeak and side bunks

  • 2 curtained lockers above side storage areas
  • 2 large lockers above the side bunks with backrests to match the saddlery
  • 2 small lockers in the forepeak
  • 1 locker under the anchor locker
  • Floor medallion
  • Side bunk smooth wood finish
  • Cabin access step
  • Shelves on side lockers
  • Anchor locker bulkhead doubling
  • Cockpit bulkhead doubling

  • Electrical panel with 6 switches and 6 fuses
  • 2 spotlights on port and starboard furniture
  • 2 spotlights on cockpit bulkhead
  • 12 V socket + USB socket
  • Power supplies for masthead light and compass light
  • Power supply for bilge pump
  • Main circuit breaker
  • Battery tray (without battery)

  • 1 electrical bilge pump controlled from the electric panel
  • 1 manual bilge pump operated from cockpit

Boat exterior

  • Light grey gelcoat (RAL close to 7035)
  • Anthracite gray adhesive edging

White gelcoat ( RAL close to 9016)

Stripped cast-iron keel protected by epoxy anti-corrosion treatment

Aluminum section with black plastic collar

Smoked PPMA roof bays windows

  • 1 Circular opening hatch at front of the coachroof
  • 2 Lockable plastic hatches under helmsman’s seat

  • 1 PMMA sliding panel
  • 1 cellular PVC door
  • 1 key lock
  • 1 ventilation grate
  • 1 anchor hatch
  • 2 helmsman seats
  • 1 back cockpit cover
  • 1 pulpit
  • 2 pushpits
  • 4 stanchions
  • 2 side guard line with straps for the helmsman
  • 1 rear guard line

4 aluminum cleats

  • 4 mast foot blocks
  • 2 triple blockers
  • 2 size 6 winches
  • 1 lacquered aluminum console with 6 clam cleats
  • 2 curved 22 mm rails
  • 2 ball-bearing travelers with D=40 sheet blocks
  • Linear adjustment of travelers by 3-strand hoist
  • 2 size 15 winches Self Taling
  • 1 curved 22 mm rail
  • 1 ball-bearing traveller with double sheave D=57
  • Cart transverse adjustment by 3-strand hoists (2 single pulleys on cart + 2 double pulleys)
  • 2 quick-release clam cleats
  • 2 single sheave blocks D=57
  • 1 swivel equipped with clam cleat and winch pulley
  • 1 cascade hoist consisting of :
    1 single pulley D=40
    1 double pulley D=29
    1 triple pulley D=29
  • 2 articulated stainless steel hoops
  • 2 eyestraps
  • 2 fixed clam cleats

1 double cascade hoist consisting of :

  • 1 single pulley for cable
  • 2 double pulleys with eyestrap
  • 2 triple pulleys
  • 2 cheek pulleys
  • 1 elliptical rudder
  • 1 polyester helm
  • 1 aluminum stick

1 built-in bath ladder

  • Z Spars mast and boom – Spectra halyards
  • Sheave and messenger for head spinnaker halyard

1 motor chair slide HB

Standard

Boat interior

White counter-molding

White gelcoat finish

Taupe-colored mattresses for forepeak and side bunks

  • 2 lockers above side storage areas
  • 2 large lockers above side bunks
  • Floor medallion
  • Side bunk smooth wood finish
  • Cabin access step
  • Electrical panel with 4 switches and 4 fuses
  • 1 spotlight on starboard furniture
  • Power supplies for masthead light and compass light
  • Power supply for bilge pump
  • Main circuit breaker
  • Battery tray (without battery)

  • 1 electrical bilge pump controlled from the electric panel
  • 1 manual bilge pump operated from cockpit

Boat exterior

  • Light grey gelcoat (RAL close to 7035)
  • Anthracite gray adhesive edging

White gelcoat ( RAL close to 9016)

Stripped cast-iron keel protected by epoxy anti-corrosion treatment

Aluminum section with black plastic collar

Smoked PPMA roof bays windows

  • 1 Circular opening hatch at front of the coachroof
  • 2 Lockable plastic hatches under helmsman’s seat

  • 1 PMMA sliding panel
  • 1 cellular PVC door
  • 1 key lock
  • 1 ventilation grate
  • 1 anchor hatch
  • 2 helmsman seats
  • 1 back cockpit cover
  • 1 pulpit
  • 2 pushpits
  • 4 stanchions
  • 2 side guard line with straps for the helmsman
  • 1 rear guard line

4 aluminum cleats

  • 4 mast foot blocks
  • 2 triple blockers
  • 2 size 6 winches
  • 2 clam cleats on chocks (boom downhaul)
  • 2 straight 22 mm rails
  • 2 ball-bearing travelers with D=40 sheet blocks
  • Linear adjustment of travelers by 3-strand hoist
  • 2 size 8 winches
  • 2 clam cleats on wedges
  • 1 curved 22 mm rail
  • 1 ball-bearing traveller with double sheave D=57
  • Cart transverse adjustment by 3-strand hoists (2 single pulleys on cart + 2 double pulleys)
  • 2 quick-release clam cleats
  • 2 single sheave blocks D=57
  • 1 swivel equipped with clam cleat and winch pulley
  • 1 cascade hoist consisting of :
    1 single pulley D=40
    1 double pulley D=29
    1 triple pulley D=29
  • 2 articulated stainless steel hoops
  • 2 eyestraps
  • 2 fixed clam cleats

1 double cascade hoist consisting of :

  • 1 single pulley for cable
  • 2 double pulleys with eyestrap
  • 2 triple pulleys
  • 2 cheek pulleys
  • 1 elliptical rudder
  • 1 polyester helm
  • 1 aluminum stick

1 built-in bath ladder

Z Spars mast and boom – Spectra halyards

1 motor chair slide HB

Club

Boat interior

White counter-molding

White gelcoat finish

Without saddlery

  • 2 lockers above the side storage areas
  • 2 small lockers above side bunks
  • Floor medallion
  • Side bunk smooth wood finish
  • Cabin access step

Without electricity

1 manual bilge pump operated from cockpit

Boat exterior

Light grey gelcoat (RAL close to 7035)